MarCablo S
Series 17 228

Cable printing

Description

Ready to use special ink for printing onto most types of thermoplastic elastomers insulated electric wires e.g. PA, PP, PVC, ABS, EPDM, PBTP, PS, PPO, Santopren, Levaflex, chlorinated olefins, polyester, etc.

Basis Solvent based synthetic resin
Application method Indirect gravure printing (offset) e.g. Medek + Schörner KS or RSD Technik GmbH
Form of supply All international colour shades e.g. RAL, IEC 304 and also metallic shades available
Technical Data
Solid content23 - 42%depending on the shade ISO 3251
Density0,9 - 1,2 g/cm³depending on the shade ISO 2811-1 at 23°C
Viscosity40"/6 mmEN ISO 2431 at 23°C
Flash point24°CISO 1523
Instruction
PreparationStir before use
DilutionHERKULA special thinner 35063 to readjust the viscosity in the machine. Amount of thinner depends on the machine.
CuringPrint on hot insulations approx. 100°C e.g. after extruder
Process speedup to 500 m/min
CleaningHERKULA special cleaning agent 35014
Information
Shelf life: 6 months in a closed can (> 15°C), Standard Packaging: 1 L can. If the product is gelatinous please store the ink at 40°C - 50°C for several hours. This effect is totally reversible and has no influence on the quality.
Observe your Material Safety Data Sheet as well as the instructions on the label
Good adhesion without special corona pre-treatment.
  • No influence on the electrical characteristics
  • Resistance to "bleeding"
  • Pigments are free of lead and other heavy metal
  • Version: 29/03/2016
    Export Data Sheet