MarCablo S
Series 17 203

Cable printing


Ready to use special halogen-free ink for ring-marking onto plastic insulated electric wires, especially PE, XLPE

Basis Solvent based synthetic resin
Application method Disc-Marker or spray jet e.g. Medek + Schörner RS
Form of supply All international colour shades e.g. RAL, IEC 304 and also metallic shades available
Technical Data
Solid content11 - 21%depending on the shade ISO 3251
Density0,9 - 1,0 g/cm³depending on the shade ISO 2811-1 at 23°C
Viscosityapprox. 25"/3 mmapprox. 60"/2 mm EN ISO 2431 at 23°C
Flash point- 6°CISO 1523
PreparationStir before use
DilutionHERKULA special thinner 17 289 (toluene free) to readjust the viscosity in the machine. Amount of thinner depends on the machine.
CuringPrint on hot insulations approx. 100°C e.g. after extruder
Process speed300 m/min - 1200 m/min
CleaningHERKULA special cleaning agent 35014
Shelf life: 2 years (except special colours) in a well closed can, Standard Packaging: 10 L can (other packaging on request)
Observe your Material Safety Data Sheet as well as the instructions on the label
In case of polyethylene substrates a surface oxidation by corona pre-treatment is necessary in order to achieve good adhesions.
  • halogen-free
  • No influence on the electrical characteristics
  • Resistance to "bleeding"
  • Pigments are free of lead and other heavy metal
  • Version: 04/08/2015
    Export Data Sheet