MarCablo S
Series 20119

Cable printing


Ready to use special ink for ring-marking onto most types of plastic insulated electric wires

e.g. PVC, PE, XLPE, etc.

Basis Solvent based synthetic resin
Application method Disc-Marker or spray jet e.g. Medek + Schörner RS
Form of supply All international colour shades e.g. RAL, IEC 304 and also metallic shades available
Technical Data
Solid content10 - 25 %depending on the shade ISO 3251
Density0,9 - 1,5 g/cm³depending on the shade ISO 2811-1 at 23°C
Viscosity25"/3 mm DIN CupEN ISO 2431 at 23°C
PreparationStir before use
DilutionHERKULA special thinner 20119 to readjust the viscosity in the machine. Amount of thinner depends on the machine.
CuringPrint on hot insulations approx. 100°C e.g. after extruder.
Process speed1200 m/min - 2400 m/min
CleaningHERKULA special cleaning agent 35014
Shelf life: 2 years (except special colours) in a well closed can, Standard Packaging: 10 L can (other packaging on request)
Observe your Material Safety Data Sheet as well as the instructions on the label
In case of polyethylene substrates a surface oxidation by corona pre-treatment is necessary in order to achieve good adhesions.
  • No influence on the electrical characteristics
  • Resistance to "bleeding"
  • Pigments are free of lead and other heavy metal
  • Version: 04/07/2016
    Export Data Sheet