MarCablo W
Series 07 205

Cable printing


Ready to use special ink for printing onto most types of plastic insulated electric wires e.g. PVC, PE, XLPE, Monosil, PA, Tefzel, etc...

Basis Solvent based syntetic resin
Application method Gravure printing e.g. Medek + Schörner KS or RSD Technik GmbH
Form of supply All international colour shades e.g. RAL, IEC 304 ans also metallic shades available
Technical Data
Solid content9 - 20%depending on the shade ISO 3251
Density1,0 - 1,1 g/cm³depending on the shade ISO 2811-1
Viscosity27" +/- 3 / 3 mmEN ISO 2431
Flash pointnot applicableISO 1523
PreparationStir before use
DilutionHERKULA special thinner 17 292 ro readjust the viscosity in the machine. Amlount of thinner depends on the machine.
CuringPrint on hot insulations approx. 100°C e.g. after extruder
Process speed500 m/min - 1200 m/min
CleaningHERKULA special cleaning agent 35015
Shelf life: 2 years in a well closed can, Standard Packaging: 1 - 2 - 5 - 10 L can
Observe your Material Safety Data Sheet as well as the instructions on the label
In Case of polyetylene substrates a surface oxidation by corona pre-treatment is necessary in order to achieve good adhesions. It is advisable to pre-cool the plastics material after extrusion by means of ambient air or water jet (residual water must be blown of).
    Version: 02/06/2014
    Export Data Sheet