FibreCoat
Series 841/802

Optical Fibre coating

Description

UV-curable acrylate as outer coating for optical fibres during drawing

Basis Reactive mono- and oligomers
Application method Draw tower for optical fibres. Coated on primary coating of series 840 (wet on wet or tandem procedure)
Form of supply Colourless resin
Technical Data
Density1,04 - 1,14 g/cm³ISO 2811-1 at 40°C
Viscosity1000 - 1200 mPasDIN 53019-1 cone/plate at 40°C
Flash point>100°CISO 1523
Instruction
PreparationStir before use. Prevent to beat air bubbles into resin
CuringEffected by means of high-pressure mercury vapour lamps or Fusion bulbs
Process speedup to 1500 m/min
CleaningHERKULA special cleaning agent 35014
Information
Shelf life: One year in a well closed bucket (<30°C) protected from light, Standard Packaging: 10 kg bucket
Observe your Material Safety Data Sheet as well as the instructions on the label
No evaporating solvent, no relevant shrinkage
  • No detectable influence on the properties of the optical fibres
  • Thermostable up to max. 150°C (3000 hrs tested)
  • Applicable for single- and multimode fibres
  • Operation temperature -60 °C to 150 °C
  • No excess attenuation
  • Version: 16/01/2017
    Export Data Sheet